Salt Bath Furnace
Pot-type salt bath furnace for fast, even hardening, tempering and treatment of tools and parts.
Also called a salt bath bhatti or pot type salt bath furnace.
Photo shown is a representative image.


Key Features
Fast, even heating by liquid contact
Clean surface with little oxidation
External heating of the pot
Pot sized to your baskets
Digital temperature control
Can be paired with a pre-heating oven
Specifications
Type: pot furnace with external heating
Temperature: as per salt and process (low-temperature tempering to high-temperature hardening)
Heating: electric elements around the pot, or LPG/PNG/CNG burners
Pot: steel pot sized to basket and salt volume
Insulation: refractory brick and ceramic fibre casing
Controls: digital controller, thermocouple in protective pocket
Safety: over-temperature cut-out; fume hood recommended
Options: pre-heating oven, quench tank
Industries: Tools and dies, steel heat treatment, fasteners
About the Salt Bath Furnace
In a salt bath furnace, parts are dipped into a pot of molten salt instead of being heated in air. Liquid salt transfers heat much faster and more evenly than air, and it shields the surface from oxidation. Tools, dies and small parts therefore reach temperature quickly and come out clean. Different salt mixtures cover different jobs. Some suit low-temperature tempering and quenching, others neutral hardening at high temperature, and special salts are used for treatments such as nitriding.
AHS salt bath furnaces are pot type. A steel pot sits inside an insulated furnace casing and is heated from outside, by electric elements around the pot or by LPG, PNG or CNG burners firing into the space around it. A digital controller with a thermocouple in a protective pocket holds the bath temperature. Pot size, material and heating rating are chosen to suit the salt, the working temperature and the largest basket of parts. A fume hood over the pot is recommended.
Molten salt is hazardous. Parts and fixtures must be completely dry and pre-heated before they go into the bath, because moisture flashes to steam and can throw out molten salt violently. Operators need face shields, gloves and aprons, and nitrate salts must never touch cyanide salts or organic matter. Always follow the salt supplier's safety data sheet. For hardening without molten salt, see also our Hardening Furnace and Tempering Furnace, and for small tool-room work, the Muffle Furnace. Tell us the salt type, working temperature and basket size, and we will size the pot and heating.
Typical applications
Hardening tools and dies
Tempering and quenching small parts
Heat treating cutting tools
Treating springs and clips
Special surface treatments with suitable salts
Common questions
Why use a salt bath instead of an air furnace?
Molten salt heats parts faster and more evenly, and protects the surface from oxidation.
What temperature does a salt bath run at?
It depends on the salt mixture and process, from low-temperature tempering salts to high-temperature hardening salts.
Why must parts be dry before dipping?
Water flashes to steam in molten salt and can throw salt out of the pot. Always pre-heat and dry parts.
Is the pot heated by gas or electricity?
Either. Electric elements around the pot, or LPG, PNG or CNG burners.
What safety gear is needed?
Face shield, heat-resistant gloves and apron, plus a fume hood over the pot. Follow the salt supplier's safety data sheet.
Related ovens and furnaces
Need a quotation? Share your load size, working temperature and fuel, and we will suggest a design. Call +91 98105 20120, message us on WhatsApp or send an enquiry. For a quick figure first, try our oven heat load calculator.
