top of page

Home  /  Products  /  Muffle Furnace

Muffle Furnace

Electric muffle furnace for lab tests, small heat treatment and ashing, up to 1,200°C.

Also called a laboratory furnace, box muffle furnace or muffle bhatti.

Key Features

  • Clean, even heat inside an enclosed chamber

  • Controller range matched to your use

  • Long-life Kanthal elements

  • Ramp and soak programming option

  • Safe, insulated outer casing

  • Compact bench or floor models

Specifications

Maximum temperature: up to 1,200°C

Controller ranges: 0–400°C, 0–600°C or 0–1,200°C

Elements: Kanthal coil in 85 mm element bricks

Insulation: 230 mm insulation brick or ceramic fibre

Low-temperature version: 3 zones × 6 kW sealed elements, 300°C

Controls: digital PID; thyristor and ramp/soak programmer optional

Safety: over-temperature cut-out, door switch

Sizes: laboratory and tool-room chambers, custom on request

Industries: Laboratories, tool rooms, quality control, education

About the Muffle Furnace

A muffle furnace heats work inside an enclosed chamber, the muffle, so the work is shielded from the heating elements and gets clean, even heat. It is the standard furnace for laboratories and tool rooms. Typical jobs are ash and loss-on-ignition tests, small hardening and tempering work, heat-treating samples, and annealing or sintering small parts. Buyers want an accurate controller, a chamber that holds temperature evenly, long element life and a casing that stays safe to touch.

 

AHS muffle furnaces are electric. They use Kanthal coil elements set in 85 mm element bricks, backed by 230 mm insulation bricks or ceramic fibre, inside a steel casing. Controllers are supplied for ranges such as 0–400°C, 0–600°C or 0–1,200°C, depending on the use. Low-temperature versions have been built with three-zone sealed elements of 6 kW each for 300°C work, insulated with 75 mm mineral wool. Thyristor control and an over-temperature cut-out are available, as is a programmable controller for ramp and soak.

 

Lab and tool-room sizes are our standard muffle range. For larger industrial chambers with heavier loads, see also our Chamber Type Furnace, and for higher-output hardening work, the Hardening Furnace. For oven-temperature work below 350°C, the Hot Air Oven may suit better. Tell us the chamber size, maximum temperature, what you will heat, and whether you need programmable cycles, and we will propose the right model.

 

Typical applications

  • Ash and loss-on-ignition testing

  • Hardening and tempering small tools

  • Heat treating test samples

  • Annealing and sintering small parts

  • Teaching and research labs

 

Common questions

What temperature can a muffle furnace reach?

Our muffle furnaces go up to 1,200°C. Lower-range models are available for 400°C and 600°C work.

 

Which elements do you use?

Kanthal coil elements set in grooved element bricks.

 

Is the muffle furnace gas fired?

No. Our muffle furnaces are electric for clean, accurate heat. For gas-fired heat treatment, see our Chamber Type Furnace and Hardening Furnace.

 

Can I program a heating and cooling cycle?

Yes, with an optional ramp and soak programmer.

 

What is the difference from a chamber furnace?

Muffle furnaces are lab and tool-room sizes. Chamber furnaces take larger industrial loads.

 

Related ovens and furnaces

 

Need a quotation? Share your load size, working temperature and fuel, and we will suggest a design. Call +91 98105 20120, message us on WhatsApp or send an enquiry. For a quick figure first, try our oven heat load calculator.

bottom of page