top of page

Home  /  Furnaces & Ovens for Battery & Lead Oxide Plants

Furnaces & Ovens for Battery & Lead Oxide Plants

Lead-acid battery plants and oxide makers run several heat processes. Lead is melted for casting grids and feeding oxide plants, Barton pots oxidise molten lead into leady oxide for battery paste, red lead furnaces convert litharge into red lead, and plates and materials are dried. Temperature and airflow decide oxide quality, and lead dust must be kept inside a closed system and collected.

 

Advance Heating Systems has supplied a red lead furnace, a Barton furnace and lead melting furnaces to a lead oxide plant, each with its own control panel, together with hot air generators that supply the heat. We also build drying ovens and tray dryers, and supply burners, thermocouples and heating spares. Heating is electric, LPG, PNG or CNG.

Equipment we build for this industry

Gas fired furnace body that heats the Barton pot for making lead oxide for batteries.

Insulated furnace with hot air generator that heats a red lead oxidation pot to about 400°C.

Gas fired or electric furnace that heats a lead pot for melting, casting and Barton feed.

Oven for drying battery electrodes and cells to remove moisture before assembly.

Oven supplied with hot air from an external fuel-fired hot air generator, easy to add to existing chambers.

Batch hot-air tray dryer for powders, granules, pastes and small parts, with SS trays and moisture exhaust.

How we help Battery & Lead Oxide Plants

Heating processes in this industry

  • Lead melting: lead melts at 327.5°C; pots are held above this for casting and feeding

  • Barton pot oxidation: pot externally heated to about 370–480°C, after which the reaction largely keeps it hot

  • Barton oxide quality: degree of oxidation of about 70–80% is typical for battery oxide

  • Red lead conversion: AHS red lead furnace operating at about 400°C, heated by a hot air generator

  • Dust collection: oxide carried to fabric filters, which reach about 99% collection

  • Drying of plates and materials: hot-air ovens and tray dryers at controlled low temperature

 

Challenges we help solve

  • Lead exposure: lead dust needs a closed system under negative pressure and fabric-filter collection

  • Consent: lead processing needs State Pollution Control Board consent, with dust collection conditions

  • Quality: air draft, humidity and temperature all change oxide quality and acid absorption

  • Gas supply: the 2026 West Asia disruption brought industrial gas curtailment and spot pricing

  • NCR clean-fuel rules: units in Delhi NCR must use fuels on the CAQM approved list

  • Market: the Indian lead-acid battery market is projected to grow about 4.2% a year to 2034 (IMARC)

 

Why manufacturers choose Advance Heating Systems

  • Red lead, Barton and lead melting furnaces supplied with separate control panels

  • Hot air generators with LPG/PNG burners or electric heaters and 5 HP SS-304 blowers

  • About 86 documents on hot air generators between 2003 and 2026

  • Thermocouples, burner parts and heating spares supplied from Delhi

  • Electric, LPG, PNG and CNG heating

  • Building furnaces in Delhi since 1991

 

More equipment for this industry

 

Common questions

Do you build red lead furnaces?

Yes. Our red lead furnace operates at about 400°C, heated by a hot air generator, with 150 mm ceramic insulation.

 

Can you supply heating for a Barton pot?

Yes. We have supplied Barton furnaces with control panels, and can supply electric or gas heating for pots.

 

What temperature is a lead melting pot run at?

Above lead's melting point of 327.5°C, set to your casting or feeding needs.

 

How is lead dust handled?

Oxide plants run as closed systems with fabric filters. We design the furnace to connect to your dust collection.

 

Do you supply spares?

Yes. Thermocouples, controllers, burner parts and heaters.

 

Planning a new line or replacing an old oven? Tell us your product, batch size, working temperature and fuel, and we will suggest a design. Call +91 98105 20120 or send an enquiry.

bottom of page