top of page

Home  /  Products  /  Red Lead Furnace

Red Lead Furnace

Insulated furnace with hot air generator that heats a red lead oxidation pot to about 400°C.

Also called a red lead oxidation furnace, red lead plant furnace or Pb3O4 furnace; known locally as a red lead bhatti.

Photo shown is a representative image.

Key Features

  • Even hot air heating across a large pot

  • Gas fired hot air generator with gas train

  • Safety control in firing chamber

  • Heavy plate body with ribbed top

  • Built to your pot and stirrer drawing

  • Electric heating on request

Specifications

Example pot: 2,450 mm diameter × 610 mm deep (customer scope)

Furnace body: 3,120 mm diameter × 1,350 mm high

Plates: 12 mm top, 5 mm bottom and sides

Operating temperature: 400°C

Insulation: 150 mm ceramic fibre (128 density) and mineral wool

Heating: hot air generator, 1,00,000 kcal/hr gas burner

Blower: 2 HP SS-304, 1,500 CFM

Control: furnace temperature, firing chamber safety, stirrer motor starter

Industries: Lead oxide and battery materials, paints and pigments

About the Red Lead Furnace

Red lead (Pb3O4) is made by further oxidising lead oxide from a Barton plant in a heated, stirred pot. The furnace around the pot must hold a steady temperature over a large surface, because uneven heat gives uneven conversion and lower grade product.

 

An AHS red lead furnace for oxidation is built around a large pot, in one recent design 2,450 mm in diameter and 610 mm deep, inside a furnace body of 3,120 mm diameter and 1,350 mm height. The top plate is 12 mm and the bottom and side plates 5 mm, with channel support rings and ribbed top plate. Insulation is 150 mm of 128 density ceramic fibre with 150 kg/m³ mineral wool. The furnace operates at 400°C.

 

Heat comes from an AHS hot air generator of about 1,000 × 1,000 × 1,600 mm, with a 1,00,000 kcal/hr gas burner and gas train, a 2 HP SS-304 blower of 1,500 CFM, an SS-304 inner body and 150 mm insulation. The control panel holds the blower and burner controls, temperature control for the furnace, safety control in the firing chamber, and the starter for the stirrer motor.

 

The pot and stirrer are normally supplied by the plant or its process designer, and the furnace is built to their drawing. AHS has supplied red lead, Barton and lead melting furnaces as a set to a lead oxide plant.

 

Typical applications

  • Red lead (Pb3O4) production from lead oxide

  • Lead oxide plants for batteries

  • Red lead for paints and primers

  • Red lead for glass and ceramics

  • Replacement furnace bodies for existing red lead pots

 

Common questions

Do you supply the pot and stirrer?

Normally the pot and stirrer come from the plant or its process designer. AHS builds the furnace body, insulation, heating and controls to match.

 

What temperature does it run at?

AHS red lead furnaces are built for about 400°C operating temperature.

 

How is the furnace heated?

By a gas fired hot air generator with SS-304 blower. Electric heating can be offered instead.

 

Can it be fed from a Barton pot?

The furnace works downstream of the Barton plant. Material handling between them is part of the plant layout.

 

Do you also make Barton and lead melting furnaces?

Yes. AHS has supplied red lead, Barton and lead melting furnaces together for one plant.

 

Related ovens and furnaces

 

Need a quotation? Share your load size, working temperature and fuel, and we will suggest a design. Call +91 98105 20120, message us on WhatsApp or send an enquiry. For a quick figure first, try our oven heat load calculator.

bottom of page