top of page

Home  /  Steel, Forging & Casting Industry

Furnaces for Steel, Forging and Casting

Stress relieving, tempering, annealing and preheating furnaces for steel fabricators, forge shops and foundries, working up to 800°C and built around your charge, cycle and fuel.

Equipment for Steel, Forging and Casting Units

Bogie hearth furnace for weldments, castings and forgings, with controlled heating and cooling.

Pit furnace with forced air circulation that tempers hardened parts to the hardness you need.

Softens steel and non-ferrous parts and restores ductility after cold working.

Brings forging and die-casting dies up to working temperature to prevent thermal shock.

Bakes sand cores and dries mould coatings so castings come out free of gas defects.

Solution treatment furnace with a fast quench for aluminium castings and forgings.

Typical heat treatment cycles

  • Stress relieving of steel weldments and castings: 550°C to 650°C, soaked for about one hour per 25 mm of thickness, then cooled slowly.

  • Tempering after hardening: 150°C to 650°C, set by the hardness the part needs.

  • Sub-critical annealing: 650°C to 720°C, to soften steel between forming operations.

  • Die preheating: about 150°C to 300°C before forging or die casting.

  • Aluminium castings to T6: solution treatment at about 500°C to 540°C, quench, then ageing at 150°C to 200°C.

​

These are general industry figures; your material specification sets the actual cycle and we size the furnace to it. Customers in this sector include Ganpati Castings, Jai Mata Cast & Alloys, Soma Alloy and Abyssinia Iron & Steel (Kenya).

Planning a heat treatment furnace?

Tell us your charge weight, cycle and fuel, and we will suggest the right furnace.

bottom of page