top of page

Home  /  Ovens for Electric Motor & Transformer Makers

Ovens for Electric Motor & Transformer Makers

Transformer and motor makers must get moisture out of insulation and cure the varnish that holds windings together. Paper and pressboard in a transformer pick up water during winding, which lowers dielectric strength. Motor windings need pre-heating before dipping, and then a full varnish bake. Good drying ovens give even heat across large, heavy active parts, carry the moisture away, and keep a record of each cycle.

 

Advance Heating Systems has built transformer coil ovens for transformer makers in India and the Gulf, including a 132 kW oven with redundant controllers. We also make motor coil dryers for workshops and production, and heated vacuum chambers. Ovens are electric as standard, with LPG, PNG or CNG versions for large chambers.

Equipment we build for this industry

Trolley-type hot-air oven for drying transformer coils and core-coil assemblies, ambient to 200°C.

Oven for deep drying of transformer insulation under heat and vacuum.

Compact oven for pre-heating, drying and baking varnish on motor stators, rotors and rewound coils.

Oven for drying coils and windings before impregnation.

Oven for baking varnish on motor windings, transformer coils and electrical parts.

Oven for drying and curing varnish on stators and rotors in motor production.

How we help Electric Motor & Transformer Makers

Heating processes in this industry

  • Transformer hot-air drying: AHS ovens work from ambient to 200°C, for example 180°C operating with a 200°C design temperature

  • Vapour-phase drying: solvent vapour under vacuum at about 110–120°C, faster for large units

  • Stator pre-heating: warming windings before varnish dipping so varnish penetrates the slots

  • Varnish baking: typically about 120–180°C, per varnish data sheet

  • VPI post-curing: baking vacuum-pressure-impregnated windings to cure the resin

  • Vacuum drying: removing moisture from insulation and parts at lower temperature under vacuum

 

Challenges we help solve

  • Cycle time: conventional hot-air drying of transformers is slow; in an ABB example a small hot-air oven used 50 kW for 80 hours

  • Uniformity: large active parts need even heating; AHS transformer ovens are specified within ±10°C

  • Records: buyers need drying records, so recorders and redundant controllers are standard on larger ovens

  • Power cost: Delhi's industrial energy charge is Rs 7.75/kVAh plus fixed and surcharge components (DERC, from Aug 2024)

  • NCR clean-fuel rules: units in Delhi NCR must use fuels on the CAQM approved list; electric ovens avoid combustion emissions

 

Why manufacturers choose Advance Heating Systems

  • Transformer coil ovens supplied to transformer makers in India and the Gulf (Oman and Qatar)

  • A 132 kW transformer oven with redundant master/slave controllers and K-type thermocouples

  • About 50 documents for transformer and coil drying ovens in our files

  • Trolley-on-rail loading, moisture exhaust blowers and recorders

  • Electric as standard, with LPG/PNG/CNG for large chambers

  • Building ovens in Delhi since 1991

 

More equipment for this industry

 

Common questions

What temperature is used to dry transformer coils?

Our ovens work from ambient to 200°C. The drying temperature and time follow the transformer maker's procedure.

 

Hot-air or vapour-phase drying?

Hot air suits distribution transformers and smaller units. Vapour-phase drying under vacuum is faster for large units.

 

What temperature bakes motor varnish?

Typically about 120–180°C. Follow the varnish data sheet.

 

Do you supply recorders?

Yes. Recorders are standard on transformer ovens.

 

Can you build a large walk-in transformer oven?

Yes. Chambers and trolleys are sized to your largest active part.

 

Planning a new line or replacing an old oven? Tell us your product, batch size, working temperature and fuel, and we will suggest a design. Call +91 98105 20120 or send an enquiry.

bottom of page