top of page

Home  /  Products  /  VPI Post-curing Oven

VPI Post-curing Oven

Oven for curing resin after vacuum pressure impregnation of windings.

Key Features

  • Bogie loading for large stators and rotors

  • Rotor rotation drive during gel stage

  • Uniform heating of heavy windings

  • Programmed ramp, hold and cool

  • Fume exhaust with fresh air make-up

Specifications

Temperature: Up to 200°C

Heating: Electric or gas (indirect firing)

Category: Electrical & Electronics Ovens

Industries: Motors, generators, transformers

 

Vacuum pressure impregnation fills a winding with resin, but the resin is still liquid when the winding leaves the tank. A VPI post-curing oven hardens it. Until that cure is complete, the insulation has neither its electrical strength nor its mechanical bond. Epoxy and polyester impregnating resins are typically cured between 140°C and 165°C for several hours. Large stators and rotors come by crane onto a bogie, and rotors are often rotated during the first part of the cure so resin does not drain away. Uniform heating through heavy copper and iron sections is the main design aim.

bottom of page