top of page

Home  /  Products  /  Vacuum Chamber

Vacuum Chamber

Electrically heated vacuum chamber for de-airing, low-temperature drying and process work under vacuum.

Also called a heated vacuum chamber, vacuum degassing chamber or vacuum chamber oven.

Key Features

  • Removes air bubbles from liquids and pastes

  • Low-temperature drying under vacuum

  • Programmable heating profile

  • PLC HMI with precise thyristor control

  • Overshoot and overload protection

  • Pump package matched to your process

Specifications

Type: sealed, electrically heated vacuum chamber

Temperature control: within ±1°C of set point

Controls: programmable profile controller, 7-inch PLC HMI, thyristor

Insulation: 125 mm mineral wool + ceramic fibre

Safety: overshoot protection, overload and underload trips

Vacuum: pump, gauge and valves sized to the process

Construction: vacuum-rated shell, door seal and viewing port

Heating: electric only

Industries: PVC, rubber and plastics, electrical, chemicals

About the Vacuum Chamber

A vacuum chamber is a sealed, pressure-rated vessel from which air is pumped out. With air removed, trapped bubbles in liquids and pastes expand and escape, moisture and solvents boil off at much lower temperatures, and parts can be processed with no air contact. Heating the chamber speeds all of this. Typical jobs are de-airing resins, silicones and plastisol before moulding or potting, gently drying heat-sensitive material, and holding parts under vacuum during impregnation or testing.

 

AHS builds electrically heated vacuum chambers. A 2023 build had walls insulated with 125 mm of mineral wool and ceramic fibre. It used a programmable profile controller on a 7-inch PLC HMI with thyristor control, held the set temperature within ±1°C, and was protected against overshoot, overload and underload. The chamber shell, door, seals and viewing port are built for vacuum duty. The vacuum pump, gauge and valves are selected to the vacuum level and vapour load your process needs. Heating is electric only. A vacuum chamber is never fitted with a gas combustion chamber. AHS has supplied vacuum chambers to repeat buyers in the PVC and plastics trade.

 

This page covers heated vacuum chambers for de-airing and process work. For drying large batches of material in trays under vacuum, see also our Vacuum Oven. For transformer drying, see the Transformer Vapour Phase Drying Oven and Transformer Dryer. Tell us the chamber size, product, temperature and the vacuum level your process needs, and we will specify the shell, heating and pump package.

 

Typical applications

  • De-airing plastisol, resins and silicones

  • Drying heat-sensitive materials

  • Vacuum impregnation of parts

  • Degassing potting compounds

  • Process and leak testing under vacuum

 

Common questions

What is a vacuum chamber used for?

Removing trapped air from liquids and pastes, drying at low temperature, and holding parts under vacuum for impregnation or testing.

 

What is the difference from a vacuum oven?

This chamber is for de-airing and process work. Our Vacuum Oven is for drying larger batches of material on trays under vacuum.

 

Is the chamber heated?

Yes, electrically, with a programmable profile controller and ±1°C control.

 

What vacuum level can it reach?

The pump and valves are chosen for the vacuum level your process needs. Tell us your requirement.

 

Can it be gas heated?

No. Vacuum chambers are heated electrically only.

 

Related ovens and furnaces

 

Need a quotation? Share your load size, working temperature and fuel, and we will suggest a design. Call +91 98105 20120, message us on WhatsApp or send an enquiry. For a quick figure first, try our oven heat load calculator.

bottom of page