top of page

Home  /  Products  /  Aluminium Dross Extraction System

Aluminium Dross Extraction System

Heated system that recovers free aluminium from hot dross skimmed off melting furnaces, 500 kg per charge.

Also called an aluminium recovery system, dross processing unit or dross bhatti.

Photo shown is a representative image.

Key Features

  • Recovers metal while dross is still hot

  • High-alumina lining for molten aluminium

  • Automatic gas burner with flame safety

  • Electric heating option

  • Compact unit beside the melting furnace

  • Reduces aluminium lost with dross

Specifications

Capacity: 500 kg dross per charge (standard)

Lining: 115 mm high-alumina brick + 230 mm insulation brick

Heating: high-efficiency LPG/PNG/CNG burner; electric option

Combustion air: 3 HP blower

Operation: hot dross charged straight from the melting furnace

Output: recovered liquid aluminium tapped off; residue removed

Controls: burner management with flame safety

Placement: next to the melting furnace

Industries: Aluminium circles and sheet, utensils, foundries, recycling

About the Aluminium Dross Extraction System

Every time molten aluminium is skimmed, the dross that comes off carries a large share of free metal trapped among the oxide. If that hot dross is dumped and left to cool, much of the metal burns or is sold cheaply with the waste. An aluminium dross extraction system recovers it on the spot. Hot dross from the melting furnace is charged into a heated, refractory-lined vessel, kept hot by a burner, and worked so the trapped droplets join together and drain to the bottom. The recovered aluminium is tapped off as liquid metal, and the stripped, metal-poor residue is removed for disposal or further processing.

 

AHS has supplied dross extraction and aluminium recovery systems since 2012, with more than 100 documents in our files, mainly to aluminium circle, utensil and casting units. The standard system takes 500 kg per charge. It has a lining of 115 mm high-alumina bricks backed by 230 mm insulation bricks and a high-efficiency burner with a 3 HP combustion-air blower. Current systems fire LPG, PNG or CNG, and electric heating is available as an option. The unit sits next to the melting furnace, so dross goes in while it is still hot.

 

Recovery depends on dross quality and how quickly it is treated, so we do not quote a fixed yield. Treating dross hot, at the furnace, recovers far more than treating it cold later. See also our Non-Ferrous Melting Furnace and Rotary Melting Furnace, which can re-melt recovered metal or process cold dross. Tell us your melting capacity and kg of dross per day, and we will size the system.

 

Typical applications

  • Recovering aluminium from melting furnace dross

  • Treating skimmings at circle and sheet plants

  • Recovering metal at utensil plants

  • Reducing metal loss in casting units

  • Preparing dross for further processing

 

Common questions

How does dross extraction work?

Hot dross is kept hot in a heated vessel and worked so the trapped aluminium joins together and drains out. The metal is tapped off and the residue removed.

 

How much aluminium will I recover?

It depends on dross quality and how fast it is treated. Treating dross hot at the furnace recovers far more than treating it cold.

 

What capacity is standard?

500 kg of dross per charge.

 

Which fuels can it use?

LPG, PNG or CNG through an automatic burner, or electric heating as an option.

 

Can recovered metal go back into the melt?

Yes. Recovered aluminium can be returned to your melting furnace.

 

Related ovens and furnaces

 

Need a quotation? Share your load size, working temperature and fuel, and we will suggest a design. Call +91 98105 20120, message us on WhatsApp or send an enquiry. For a quick figure first, try our oven heat load calculator.

bottom of page