top of page

Home  /  Products  /  Hot Air Oven

Hot Air Oven

Electric chamber oven with forced hot-air circulation for drying, curing and testing, 50–350°C.

Also called an industrial hot air oven, forced convection oven or electric chamber oven.

Key Features

  • Forced air circulation for even shelf temperatures

  • Three-wall cabinet keeps the outer skin cool

  • Programmable ramp, soak and cool on PLC models

  • Adjustable moisture exhaust damper

  • Shelves, trays or trolley loading

  • Independent over-temperature safety cut-out

Specifications

Working range: 50–350°C

Standard sizes: 0.5 m cube (16 kW) and 1 m cube (24 kW); custom sizes

Control accuracy: on/off at set point within ±1°C

Airflow: hot-air generator with 2 HP ID-fan blower

Construction: three-wall, 1.6 mm SS outer, 3 mm inner

Insulation: 125 mm mineral wool (150 kg/m³) + ceramic fibre

Controls: thyristor; 7-inch PLC HMI optional

Cooling: motorised butterfly damper for controlled cooling (option)

Safety: over-temperature controller and door interlock

Industries: General engineering, electrical, plastics, chemicals, laboratories

About the Hot Air Oven

A hot air oven is a general-purpose industrial chamber oven. Heaters warm the air and a fan drives it round the chamber, so parts on shelves or trays heat evenly from all sides. It is the oven most factories buy first: for drying components after washing, curing adhesives and small coating jobs, conditioning samples, pre-heating parts and quality testing. The key requirements are an even temperature on every shelf, a controller that holds the set point, and a cabinet that stays cool and safe outside.

 

AHS builds hot air ovens from bench-size cabinets to walk-in chambers. Two standard examples are a 0.5 m cube oven at 16 kW and a 1 m cube oven at 24 kW, both working from 50°C to 350°C. They use a hot-air generator with an ID-fan blower (2 HP) and three-wall construction, with a 1.6 mm stainless outer sheet, a 3 mm inner and 125 mm of 150 kg/m³ mineral wool plus ceramic fibre. Control is by thyristor with a controller that switches at the set temperature to ±1°C. Options include a 7-inch PLC HMI and a motorised butterfly damper for programmed, controlled cooling.

 

Ovens can be fitted with shelves, trays or trolleys and an exhaust damper for moisture. For an oven with infrared lamps alongside hot air, ask about our IR-assisted version. For larger loads see also the Walk-in Oven and Truck-in Oven. Tell us your chamber size, maximum temperature and what you are heating, and we will size heating and airflow. Gas-fired versions on LPG or PNG are available for large chambers.

 

Typical applications

  • Drying parts after washing or plating

  • Curing adhesives, sealants and small coating jobs

  • Pre-heating components and inserts

  • Moisture removal from powders and granules

  • Quality testing and sample conditioning

 

Common questions

What temperature can the hot air oven reach?

Our standard ovens work from 50°C to 350°C. Higher ratings are possible on request.

 

How even is the temperature?

Forced air circulation keeps shelves close to the set point. The controller switches at the set point within ±1°C.

 

What sizes are available?

Standard 0.5 m and 1 m cube chambers, plus custom cabinets and walk-in chambers.

 

Can it be programmed for heating and cooling?

Yes. A PLC with HMI and a motorised damper can run ramp, soak and controlled cool cycles.

 

Is a gas-fired version possible?

Yes, for larger chambers we build LPG or PNG fired hot air ovens.

 

Related ovens and furnaces

 

Need a quotation? Share your load size, working temperature and fuel, and we will suggest a design. Call +91 98105 20120, message us on WhatsApp or send an enquiry. For a quick figure first, try our oven heat load calculator.

bottom of page