top of page

Home  /  Products  /  Shuttle Oven

Shuttle Oven

Two trolleys shuttle in and out of one oven, so one load is processed while the next is being prepared.

Key Features

  • One chamber served by two bogies or trolleys

  • Entry from opposite ends or by transfer car

  • Short changeover keeps the lining hot

  • Powered bogie drive and door for quick turnaround

  • Cycle programs stored for repeat loads

Specifications

Temperature: Up to 650°C

Heating: Electric, gas (LPG/PNG/CNG) or furnace oil, or dual fuel

Category: Batch & Walk-in Ovens

Industries: Coating, heat treatment, high-volume batch

 

A shuttle oven has one heated chamber and two bogies or trolleys. While the first load is being heated, the second is unloaded and reloaded outside. At the end of the cycle the bogies change places. The chamber is hardly ever empty, so more batches are completed per shift and less heat is lost between them. Shuttle ovens are built up to 650°C for coating, drying and low-temperature heat treatment. The bogies can enter from opposite ends or from the same end on a transfer track. Because the chamber lining stays hot between loads, fuel use per tonne is lower than with a single-bogie oven worked the same way.

bottom of page