top of page

Home  /  Products  /  Pre-Heating Oven

Pre-Heating Oven

Batch oven that brings parts to a set temperature before coating, dipping, moulding or assembly.

Also called a preheat oven or part pre-heating oven.

Key Features

  • Fast recovery after loading

  • Even temperature through the load

  • Indirect gas firing option

  • Timer and end-of-cycle alarm

  • Trolley or rack sized to your parts

  • Can double as a drying or curing oven

Specifications

Working range: typically 100–350°C (higher on request)

Loading: trolley, rack or shelves

Airflow: forced hot-air circulation fans

Heating: electric, or LPG/PNG/CNG burner with indirect firing

Insulation: ceramic fibre + mineral wool, three-wall casing

Controls: PID with thyristor; PLC/HMI optional

Safety: independent over-temperature controller, door limit switch

Sizing: heating matched to steel mass per hour

Industries: Powder coating, PVC dip coating, engineering, foundries

About the Pre-Heating Oven

Many processes work better, or only work, when the part is already hot. Castings are pre-heated before powder coating so that trapped gas escapes before the powder goes on, instead of blistering the cured film. Metal parts are pre-heated before PVC or plastisol dipping, because the part's temperature decides how thick the coating builds. Inserts are warmed before moulding, and parts are brought to an even temperature before shrink-fitting or bonding. A pre-heating oven does this job in batches, with a steady, uniform temperature and enough heating power to recover quickly after the door opens.

 

AHS pre-heating ovens are trolley, rack or shelf ovens with forced hot-air circulation. We size heating and airflow to the steel mass you load per hour. A heavy charge needs more power to come up to temperature than the oven's own heat losses would suggest. Construction follows our standard practice: a three-wall casing, ceramic fibre and mineral wool insulation, PID control with thyristor, an independent over-temperature controller and a door limit switch. Heating is electric or by an LPG, PNG or CNG burner in an indirect firing chamber.

 

Some pre-heating jobs have their own dedicated pages. See also the Die Preheating Oven for forging and extrusion dies, the Mould Preheating Oven for moulds, and the Welding Preheat Oven for weld preparation. Use this page for general pre-heating before coating, dipping and assembly. Tell us the part size, weight per load and the temperature you need, and we will recommend the chamber size and heating rating.

 

Typical applications

  • Pre-heating castings to outgas before powder coating

  • Pre-heating metal parts before PVC or plastisol dipping

  • Warming inserts before moulding

  • Pre-heating parts for shrink fitting and bonding

  • Pre-heating before fluidised-bed coating

 

Common questions

Why pre-heat castings before powder coating?

Castings hold trapped gas. Heating them first drives it out, so it does not blister the powder film during cure.

 

How does part temperature affect PVC dip coating?

A hotter part builds a thicker coat. Pre-heating to a controlled temperature gives a repeatable thickness.

 

What temperature can the oven reach?

Most pre-heating jobs need 100–350°C. Higher ratings can be built.

 

Is this different from your die preheating oven?

Yes. Die and mould pre-heating have their own pages. This oven is for general pre-heating before coating, dipping or assembly.

 

What heating options are available?

Electric, LPG, PNG or CNG.

 

Related ovens and furnaces

 

Need a quotation? Share your load size, working temperature and fuel, and we will suggest a design. Call +91 98105 20120, message us on WhatsApp or send an enquiry. For a quick figure first, try our oven heat load calculator.

bottom of page