top of page

Home  /  Products  /  Hardening Furnace

Hardening Furnace

Electric or gas furnace that heats steel parts to hardening temperature for quenching, up to 1,200°C.

Also called a hardening bhatti or heat treatment hardening furnace.

Key Features

  • Batch or continuous designs

  • Fast transfer to the quench

  • Protective atmosphere or packing option

  • Even heating through the section

  • Independent over-temperature protection

  • Paired hardening and tempering lines

Specifications

Maximum temperature: up to 1,200°C

Typical hardening range: about 800–950°C depending on steel

Types: batch box/chamber or continuous conveyor

Electric: Kanthal A1 elements, PID with thyristor

Gas: LPG/PNG/CNG burners with flame safety

Conveyor drive: 1 HP AC variable speed (conveyor models)

Insulation: up to 225 mm ceramic fibre + mineral wool

Quench: oil, water or polymer tank at discharge (option)

Industries: Steel forging and casting, fasteners, tools and dies, auto parts

About the Hardening Furnace

Hardening heats steel above its critical temperature, usually somewhere in the 800–950°C band depending on the grade, holds it there until the whole section has transformed, and then quenches it fast in oil, water or polymer. The result is high hardness and wear resistance. The parts are then tempered to relieve brittleness. A hardening furnace must reach temperature evenly, protect the surface from heavy scale, and let the operator move parts to the quench quickly.

 

AHS builds hardening furnaces in batch box and chamber form for tools, dies and jobbing work, and as continuous conveyor furnaces for nuts, bolts, fasteners and small parts. Electric high-temperature hardening furnaces use Kanthal A1 elements, ceramic fibre linings and PID with thyristor control, and are rated up to 1,200°C. Gas-fired conveyor furnaces for hardening and tempering fasteners use a 1 HP AC variable-speed drive and 225 mm ceramic and mineral wool insulation, and fire LPG, PNG or CNG. A quench tank with oil circulation can be placed at the furnace discharge. Where scale or decarburisation must be avoided, the work can be packed or run under a protective atmosphere.

 

After hardening, parts go to a tempering furnace. See also our Tempering Furnace, and for a combined line, ask about hardening and tempering conveyor furnaces built as a pair. For heavy loads, see the Bogie Hearth Furnace. For small tools and labs, see the Muffle Furnace and Chamber Type Furnace. Tell us the steel grade, part size, weight per hour and the quench you use.

 

Typical applications

  • Hardening nuts, bolts and fasteners

  • Hardening tools, dies and punches

  • Hardening gears, shafts and pins

  • Hardening agricultural and auto parts

  • Hardening springs and clips before tempering

 

Common questions

What temperature is used for hardening steel?

Most carbon and alloy steels are hardened at about 800–950°C. The exact figure depends on the grade.

 

What quench should I use?

Oil, water or polymer, depending on steel grade and part size. We can supply a quench tank with the furnace.

 

Batch or conveyor furnace?

Conveyor furnaces suit steady volume of small parts like fasteners. Batch furnaces suit tools, dies and mixed jobs.

 

How do I reduce scale?

Use a protective atmosphere or pack the parts. Correct temperature control also limits scale.

 

Do I also need a tempering furnace?

Yes. Hardened steel must be tempered. See our Tempering Furnace.

 

Related ovens and furnaces

 

Need a quotation? Share your load size, working temperature and fuel, and we will suggest a design. Call +91 98105 20120, message us on WhatsApp or send an enquiry. For a quick figure first, try our oven heat load calculator.

bottom of page