Annealing Furnace
Box, bogie or pit furnace for annealing steel, brass, copper and aluminium foil, up to 1,200°C.
Also called an annealing bhatti or softening furnace.



Key Features
Box, bogie or pit design to suit the load
Even temperature through dense loads
Programmable heating, soak and cooling
Recorder for heat treatment records
Gas, electric or dual-mode heating
SS firing chamber keeps flame off the work
Specifications
Maximum temperature: up to 1,200°C
Types: box, bogie hearth or pit
Steel sub-critical anneal: about 650–720°C
Aluminium foil final anneal: about 250–300°C, long soak
Brass/copper example: PNG-fired, 100–750°C working
Heating: electric, LPG/PNG/CNG burners
Insulation: ceramic fibre, insulation brick, fire-brick roof as needed
Controls: digital PID with timer; recorder/data logger optional
Industries: Steel, brass and copper, aluminium foil, engineering
About the Annealing Furnace
Annealing softens metal hardened by rolling, drawing, pressing or welding. It relieves internal stress and restores ductility so the metal can be formed again. Each metal needs its own cycle. Steel gets a sub-critical anneal at about 650–720°C. Brass and copper sheet are annealed at lower temperatures, and aluminium foil gets a long, low final anneal of about 250–300°C that may run for 30–60 hours. An annealing furnace has to reach the right temperature, hold it evenly through the whole load and cool at the right rate.
AHS builds annealing furnaces in box, bogie and pit designs rated up to 1,200°C, with an optional recorder or data logger. Annealing ovens and furnaces are our largest family, with close to 800 documents in our files. One PNG-fired brass sheet annealing furnace, built in 2023, works from 100°C to 750°C. It has an SS-304 firing chamber and firing tube, 150 mm ceramic insulation with a 230 mm fire-brick top, a digital controller and a cycle-end timer. Steel annealing furnaces use ceramic fibre linings with circulation fans in SS-310 where needed, and heating is electric, LPG, PNG or CNG.
This is the general annealing furnace page. For specific jobs, see also the Circle Aluminium Annealing Oven for utensil circles, the Wire Annealing Oven for wire coils, the Bell Annealing Furnace for coils and strip, the Copper and Brass Annealing Oven, and the Low Temperature Annealing Oven for foil and light work. Tell us the metal, load size and weight, and the cycle you need, and we will recommend the right type.
Typical applications
Annealing steel pressings and forgings
Annealing brass and copper sheet and strip
Final annealing of aluminium foil coils
Annealing tubes and fabricated parts
Softening cold-worked parts between operations
Common questions
What temperature is used for annealing?
It depends on the metal. Steel sub-critical annealing runs at about 650–720°C. Brass and copper run lower, and aluminium foil final annealing is about 250–300°C.
Which type should I choose: box, bogie or pit?
Box suits small loads, bogie suits heavy or bulky loads, and pit suits long parts and coils.
Can you supply a recorder?
Yes. A recorder or data logger can be fitted for heat treatment records.
Can annealing be done on PNG?
Yes. We have built PNG-fired annealing furnaces for brass sheet, and also offer LPG, CNG and electric.
Do you build foil annealing furnaces?
Yes. Long low-temperature cycles for foil coils are built to order.
Related ovens and furnaces
Need a quotation? Share your load size, working temperature and fuel, and we will suggest a design. Call +91 98105 20120, message us on WhatsApp or send an enquiry. For a quick figure first, try our oven heat load calculator.
