Hot Air Generator
Gas fired or electric hot air unit with blower that supplies clean hot air to ovens and dryers.
Also called a HAG, hot air blower unit, air heater or hot air furnace; known locally as a garam hawa machine.




Key Features
Heats from outside the work chamber
SS firing chamber and SS blower
Gas train and flame safety on gas models
Safety thermostat against overheating
Roof, side or floor mounting
Serves ovens, dryers and hot rooms
Retrofit to existing equipment
Specifications
Heating: LPG/PNG/CNG burner or electric heaters
Gas burner rating: e.g. 1,00,000 kcal/hr (sized to duty)
Electric load: 4.5 kW to 90 kW
Blower: 1 to 5 HP, SS-304, e.g. 1,500 CFM
Outlet air: typically 80°C to 250°C; up to 600°C on special units
Example outer size: 1,000 × 1,000 × 1,600 mm
Construction: 2 mm MS outer, SS-304 inner body
Insulation: 150 mm
Control: PID with safety controller in firing chamber
Industries: Welding electrodes, chemicals, packaging, containers, energy, lead oxide
About the Hot Air Generator
A hot air generator is a heating unit and blower in one insulated box. It makes hot air and pushes it into an oven, dryer, hot room or process duct. Because heating is outside the work chamber, one generator can serve a dryer, a furnace or a room, and it can be serviced without opening the main equipment.
AHS hot air generators are built with an LPG, PNG or CNG burner in a stainless steel firing chamber, or with finned or sealed electric heaters. A typical gas unit has an outer size of about 1,000 × 1,000 × 1,600 mm, a 1,00,000 kcal/hr burner with gas train, a 2 HP SS-304 blower of about 1,500 CFM, a 2 mm MS outer body with SS-304 inner body, and 150 mm insulation. Larger units use 5 HP SS-304 blowers and are mounted on the oven roof. Electric units range from small 4.5 kW finned heater banks with a 1 HP blower up to 30–90 kW.
Most AHS units supply hot air at around 80°C for drying and up to 200–250°C for baking, and AHS has built units for 600°C.
AHS hot air generators heat electrode baking ovens, red lead furnaces, rotary dryers, hot rooms and chamber ovens. AHS has invoiced them to packaging, container, energy and electrode companies.
Typical applications
Electrode baking ovens and hot rooms
Rotary dryers and tray dryers
Red lead and oxidation furnaces
Chamber ovens and curing ovens
Drying of foils, containers and packaging
Process air heating
Common questions
What size hot air generator do I need?
It depends on the air volume and temperature your oven or dryer needs and its heat losses. Share the chamber size, load and temperature and we will size the burner or heaters.
Gas or electric?
Gas units cost less to run where LPG, PNG or CNG is available. Electric units are simpler and suit smaller loads or places without gas.
Does combustion gas mix with the hot air?
In AHS units the burner fires in a stainless steel firing chamber. Ask us about the arrangement best suited to your product.
What temperature can it supply?
Most units supply 80°C to 250°C. AHS has built special units for 600°C.
Can it be added to my existing dryer?
Yes. We design the ducting and mounting to suit your dryer or oven.
Related ovens and furnaces
Need a quotation? Share your load size, working temperature and fuel, and we will suggest a design. Call +91 98105 20120, message us on WhatsApp or send an enquiry. For a quick figure first, try our oven heat load calculator.
