top of page

Home  /  Products  /  Tilting Furnace

Tilting Furnace

Tilting melting furnace that pours molten aluminium cleanly by tilting, 500 kg and 1,000 kg charges.

Also called a tilting melting furnace or tilting bhatti.

Key Features

  • Pour by tilting, with no hand ladling

  • Less oxide pick-up during pouring

  • Geared or hydraulic tilt

  • Automatic gas burners with flame safety

  • High-alumina lining for molten aluminium

  • Conversion of old oil-fired furnaces to gas

Specifications

Capacity: 500 kg and 1,000 kg per charge (other sizes to order)

Working size: 1,066 × 762 × 762 mm (500 kg); 1,677 × 1,066 × 915 mm (1,000 kg)

Aluminium working temperature: up to about 800°C

Tilt: geared hand-wheel, or hydraulic on larger furnaces

Lining: high-alumina/sillimanite fire brick + insulation brick

Heating: automatic LPG/PNG/CNG burners

Burner safety: flame failure cut-off, automatic ignition

Controls: automatic temperature control

Industries: Aluminium circles and sheet, foundries, casting units

About the Tilting Furnace

In a tilting furnace, the whole furnace body tips forward on trunnions to pour molten metal through a spout. Nobody has to ladle metal out by hand. Pouring is faster and safer, the melt is disturbed less, and less oxide is picked up on the way to the mould or ladle. It suits medium and large charges where bale-out by hand is slow and dangerous.

 

AHS has built tilting melting furnaces for 500 kg and 1,000 kg per charge. The 500 kg furnace has a working size of 1,066 × 762 × 762 mm, and the 1,000 kg furnace 1,677 × 1,066 × 915 mm. Other sizes are built to order. The tilt is a geared hand-wheel drive, or hydraulic on larger furnaces, chosen to suit the capacity and how often you pour. Linings use high-alumina or sillimanite fire bricks backed by insulation bricks. Heating is by automatic LPG, PNG or CNG burners with flame safety and automatic temperature control, which holds the melt at pouring temperature without overheating.

 

This is a tilting version of our melting range. For stationary bale-out furnaces, see also our Non-Ferrous Melting Furnace. For mixed scrap and dross, see the Rotary Melting Furnace. For recovering metal from skimmings, see the Aluminium Dross Extraction System. AHS can also convert an older oil-fired tilting furnace to gas firing, as described on our Industrial Gas Burner page. Tell us the metal, kg per charge, pouring height and fuel at your site.

 

Typical applications

  • Melting and pouring aluminium for casting

  • Feeding ladles for circle and sheet casting

  • Melting scrap and ingots in larger charges

  • Pouring for gravity die casting

  • Transferring metal to holding furnaces

 

Common questions

Why choose a tilting furnace?

Tilting pours metal faster and more safely than hand ladling, with less oxide pick-up.

 

What capacities do you build?

500 kg and 1,000 kg per charge are standard. Other sizes can be built.

 

How is the furnace tilted?

By a geared hand-wheel, or by hydraulics on larger furnaces.

 

Which fuels can it use?

LPG, PNG or CNG through automatic burners.

 

Can you convert my oil-fired tilting furnace to gas?

Yes. We supply gas burners and gas trains to convert existing furnaces.

 

Related ovens and furnaces

 

Need a quotation? Share your load size, working temperature and fuel, and we will suggest a design. Call +91 98105 20120, message us on WhatsApp or send an enquiry. For a quick figure first, try our oven heat load calculator.

bottom of page