Rotary Melting Furnace
Rotating drum furnace for melting aluminium scrap and dross with stirring, about 1 tonne per batch.
Also called a rotary furnace, rotary drum melting furnace or rotary bhatti.
Photo shown is a representative image.


Key Features
Rotation mixes and exposes the charge
Handles scrap, turnings and dross
Automatic gas burner with flame safety
Variable drum speed
Fume hood for treatment connection
Electric rotary retort version for roasting
Specifications
Capacity: about 1,000 kg per charge (1 tonne batch)
Maximum temperature: about 1,000°C
Heating: automatic LPG/PNG/CNG burner with flame safety
Drum: refractory-lined, rotating on rollers with geared drive
Exhaust: hood at door for fume-treatment connection
Rotary retort option: 4 mm SS-304 retort, 100–150 kg, 300–500°C, 18 kW electric
Controls: burner management and temperature control; PLC on retort models
Insulation (retort model): 200 mm ceramic blanket + rock wool
Industries: Aluminium recycling, secondary aluminium, foundries
About the Rotary Melting Furnace
A rotary melting furnace is a refractory-lined drum that turns slowly on rollers while a burner fires into it. The rotation tumbles the charge, which keeps it mixed and exposes fresh surface to the heat. That makes it well suited to mixed aluminium scrap, turnings, dross and other low-grade feed that melts poorly in a still hearth. The charge is loaded through the door, melted and stirred by rotation, and the metal is tapped or poured off. The remaining residue is then discharged.
AHS rotary melting furnaces are built for about 1 tonne per batch, or 1,000 kg per charge, and are rated to about 1,000°C. They fire LPG, PNG or CNG through automatic burners with flame safety, and drum speed is set by a geared drive. The lining is chosen to resist molten aluminium and the abrasion of tumbling scrap, and an exhaust hood at the door takes away fumes for connection to a fume-treatment system. Pollution-board consent conditions for scrap melting usually require such a system.
AHS also builds electric rotary retort furnaces for lower-temperature work. One 2025 rotary roasting furnace had a 4 mm SS-304 retort for 100–150 kg per batch at 300–500°C, with 18 kW heating, PLC profile control and 200 mm ceramic blanket and rock wool insulation. For clean ingot melting, see also our Non-Ferrous Melting Furnace and Tilting Furnace. For recovering metal from hot skimmings, see the Aluminium Dross Extraction System. Tell us the scrap type, batch size and melts per day.
Typical applications
Melting mixed aluminium scrap
Melting turnings and swarf
Recovering metal from aluminium dross
Melting low-grade feed for secondary aluminium
Roasting and treating powders in the retort version
Common questions
Why use a rotary furnace instead of a stationary one?
Rotation stirs the charge, so mixed scrap, turnings and dross melt better than in a still hearth.
What capacity do you build?
About 1 tonne per batch is our usual size. Other sizes can be discussed.
Which fuel is used?
LPG, PNG or CNG through an automatic burner.
Do I need fume treatment?
Scrap melting gives fumes. Pollution-board consent usually requires a fume-treatment system, and our door hood connects to it.
Do you make rotary furnaces for lower temperatures?
Yes. Our electric rotary retort furnaces work at 300–500°C for roasting and treating powders.
Related ovens and furnaces
Need a quotation? Share your load size, working temperature and fuel, and we will suggest a design. Call +91 98105 20120, message us on WhatsApp or send an enquiry. For a quick figure first, try our oven heat load calculator.
