top of page

Home  /  Products  /  Non-Ferrous Melting Furnace

Non-Ferrous Melting Furnace

Gas or electric melting furnace for aluminium and non-ferrous scrap and ingots, 100–1,000 kg per charge.

Also called an aluminium melting furnace, aluminium bhatti or melting bhatti.

Key Features

  • Fast melting with automatic gas burners

  • High-alumina lining resists molten aluminium

  • Automatic temperature control avoids overheating

  • Flame safety on every burner

  • Stationary or tilting designs

  • Pairs with our dross extraction system

Specifications

Capacity: 100–1,000 kg per charge (500 kg most common)

Aluminium working temperature: up to about 800°C

Lining: 115 mm sillimanite/high-alumina fire brick + 230 mm insulation brick, or 200 mm ceramic

Heating: automatic LPG/PNG/CNG burners, or electric

Burner safety: flame failure cut-off, automatic ignition

Controls: automatic temperature control with thermocouple

Types: stationary bale-out or tilting

Options: dross extraction system, fume hood

Industries: Aluminium circles and sheet, utensils, foundries, recycling

About the Non-Ferrous Melting Furnace

A non-ferrous melting furnace turns aluminium and other non-ferrous ingots and scrap into liquid metal for casting, die casting, rolling or recovery. The furnace has to bring a heavy charge up through the melting point quickly, hold the melt at pouring temperature without overheating it, and keep metal loss into dross as low as possible. Lining quality matters too. Molten aluminium attacks poor refractories, and a worn lining wastes both heat and metal.

 

AHS builds non-ferrous melting furnaces from 100 kg to 1,000 kg per charge. 500 kg is the size we build most often, followed by 600 kg and 1,000 kg. Aluminium melting furnaces work up to about 800°C. Linings use 115 mm sillimanite or high-alumina fire bricks backed by 230 mm insulation bricks, or 200 mm ceramic linings where lower heat storage is wanted. Heating is by automatic LPG, PNG or CNG burners, or electric heating for smaller furnaces and clean-fuel sites. Our customers include aluminium circle, utensil and casting units, and close to 20 aluminium melting and dross-recovery buyers have bought from us since 2017. Burners come with flame safety and automatic temperature control.

 

Furnaces can be built as stationary bale-out furnaces, or with tilting for pouring. See also our Tilting Furnace for larger charges poured by tilting. For scrap and dross melting with stirring, see the Rotary Melting Furnace, and for recovering metal from hot dross, the Aluminium Dross Extraction System. For crucible melting of small lots, see the Crucible Melting Furnace. Melting brass and copper needs higher temperatures, so please discuss those jobs with us. Tell us the metal, kg per charge, melts per shift and your fuel.

 

Typical applications

  • Melting aluminium ingots for circle and sheet casting

  • Melting aluminium scrap for re-casting

  • Melting for gravity and die casting

  • Melting utensil scrap and returns

  • Holding molten aluminium for casting

 

Common questions

What capacities do you build?

From 100 kg to 1,000 kg per charge. 500 kg is the most common size.

 

What temperature does the furnace reach?

Aluminium melting furnaces work up to about 800°C. For brass or copper, please discuss with us.

 

Which fuels can be used?

LPG, PNG or CNG through automatic burners, or electric heating for smaller furnaces.

 

How can I reduce metal loss to dross?

Avoid overheating the melt, skim correctly and recover metal from the dross. See our Aluminium Dross Extraction System.

 

Do I need a tilting furnace?

For larger charges and cleaner pouring, yes. See our Tilting Furnace.

 

Related ovens and furnaces

 

Need a quotation? Share your load size, working temperature and fuel, and we will suggest a design. Call +91 98105 20120, message us on WhatsApp or send an enquiry. For a quick figure first, try our oven heat load calculator.

bottom of page