top of page

Home  /  Products  /  Circle Aluminium Annealing Oven

Circle Aluminium Annealing Oven

Trolley-type oven for annealing stacks of aluminium circles soft for deep drawing, 500 kg to 4,000 kg loads.

Also called a circle annealing furnace, aluminium circle annealing furnace or annealing bhatti for circles.

Key Features

  • Side-wall circulation fans for even heating through the stack

  • Separate firing chamber keeps flame off the circles

  • Flame-failure gas cut-off with audio-visual alarm

  • SS-304 inner chamber option

  • Soak timer with end-of-cycle hooter

  • Optional switch-over between gas and electric heating

  • Two-trolley layouts so one charge loads while another anneals

Specifications

Charge: 500 kg and 600 kg standard; up to about 4,000 kg built

Maximum temperature: 500–550°C

Working range: 100–500°C

Electric heating: 54–90 kW (60 kW most common)

Gas heating: top-mounted LPG/PNG/CNG burner in an SS firing chamber

Insulation: 125–150 mm ceramic fibre + mineral wool

Loading: trolley on rails; motorised trolley optional

Door: counterweighted vertical-lift door

Controls: PID with soaking timer and blower starters

Industries: Aluminium circles and sheet, utensils and cookware

About the Circle Aluminium Annealing Oven

Aluminium circles are punched from cold-rolled sheet that is too hard to deep draw into pressure cookers, kadhais, pots and lids. Annealing at about 340–410°C recrystallises the metal and leaves it soft (O temper), so it can be spun or drawn without cracking. A circle aluminium annealing oven carries stacks of circles on a trolley into an insulated chamber. Side-mounted fans drive hot air through the stacks until the whole charge has soaked at temperature.

 

Aluminium annealing is the largest family in the AHS archive, with more than 550 documents from 2004 to 2026, and close to 60 circle and utensil makers appear among our buyers. The most common charge is 500 kg, with 600 kg next, and we have built ovens for loads of about 4,000 kg. Ovens are rated to 500–550°C and work from 100°C to 500°C. Electric models typically use 54–90 kW, with 60 kW the most frequent rating. Gas models fire LPG, PNG or CNG through a top-mounted burner in a separate stainless-steel firing chamber, so the flame never touches the circles.

 

Uniformity decides quality. Circles at the centre of a dense stack heat more slowly than those at the edge. Soak time should be just long enough for the coldest part of the load to reach temperature, because longer soaking wastes fuel and can coarsen the grain. We fit high-volume circulation fans, a counterweighted vertical-lift door that keeps hot air in during loading, and a PID controller with soak timer. A motorised trolley is optional. For extruded sections and coils, see also the Aluminium Ageing Oven and the Wire Annealing Oven.

 

Typical applications

  • Annealing aluminium circles for pressure cookers and utensils

  • Softening circles before deep drawing and spinning

  • Annealing aluminium sheet blanks and discs

  • Intermediate annealing between drawing stages

  • Annealing circles for lids, containers and lamp shades

 

Common questions

What temperature is used to anneal aluminium circles?

Fully soft O temper is usually reached at about 340–410°C, soaked until the whole stack is at temperature. The exact cycle depends on alloy and how hard the sheet is.

 

How many kg can one charge hold?

500 kg and 600 kg are our most common sizes. We have built ovens for about 4,000 kg per charge.

 

Why are my circles cracking during deep drawing?

Usually because annealing was incomplete. The centre of the stack never reached temperature. Better airflow and a correct soak time fix most cases.

 

Gas or electric, which is cheaper?

It depends on your power tariff and gas price. We can quote both, or a dual-mode oven that switches between them.

 

Can the oven be loaded while another batch is annealing?

Yes. A two-trolley layout lets one trolley be loaded outside while the other is in the oven.

 

Related ovens and furnaces

 

Need a quotation? Share your load size, working temperature and fuel, and we will suggest a design. Call +91 98105 20120, message us on WhatsApp or send an enquiry. For a quick figure first, try our oven heat load calculator.

bottom of page