top of page

Home  /  Products  /  Silicone Post-curing Oven

Silicone Post-curing Oven

Oven for post-curing silicone rubber parts to remove volatiles and stabilise properties.

Key Features

  • High fresh-air change with monitored exhaust

  • Single-layer loading on perforated trays

  • Step-ramp programs for thick sections

  • Stainless steel interior for clean products

  • Airflow safety interlock on the heaters

Specifications

Temperature: Up to 250°C

Heating: Electric, gas (LPG/PNG/CNG) or furnace oil, or dual fuel

Category: Rubber, Plastic & Composite Ovens

Industries: Silicone moulders, medical, automotive

 

Silicone rubber parts still contain by-products from curing when they leave the mould or extruder. Post-curing in an oven drives these out and stabilises the rubber, improving compression set and removing odour. It is normally required for food-contact and medical parts. A common schedule is about four hours at 200°C, with thicker parts brought up in steps. Plenty of fresh air must pass through the oven, in proportion to the weight of silicone loaded. Parts are spread in single layers on trays so air reaches every surface.

bottom of page