Screen Print Flash Dryer
Compact dryer for drying screen-printed inks between colours or at the end of the line.
Key Features
Infrared panels for fast surface heating
Hot-air assist for thick or water-based prints
Variable belt speed and heater height
Compact flash units to fit between print stations
Exhaust for fumes and moisture
Specifications
Temperature: Up to 200°C
Heating: Electric, gas (LPG/PNG/CNG) or furnace oil, or dual fuel
Category: Coating & Paint Curing Ovens
Industries: Textile and screen printing
In screen printing, each colour must be dry to the touch before the next is printed on top, and the finished print must be fully cured to survive washing. A flash dryer gels the ink in a few seconds between colours, and a conveyor dryer gives the final cure. Plastisol inks gel at roughly 105°C to 120°C and need the whole ink film at about 160°C for full cure. Water-based inks need longer and more airflow to drive off moisture. Infrared panels give fast surface heat, while hot air helps thick prints and water-based inks. Belt speed sets the time under the heat.
