Overhead Conveyor Oven
Parts hang from an overhead conveyor and travel through the oven, the standard layout for paint and powder coating lines.
Key Features
Overhead track and chain rated for the oven temperature
Single or multi-pass track layout inside the chamber
Air seals or vestibules at the openings
Ducted airflow aimed at the hanging parts
Conveyor lubrication and take-up for hot running
Specifications
Temperature: Up to 250°C
Heating: Electric, gas (LPG/PNG/CNG) or furnace oil, or dual fuel
Category: Conveyor & Continuous Ovens
Industries: Powder coating, paint shops, appliances
In an overhead conveyor oven the parts hang from hooks on a chain running in an overhead track. The same conveyor carries them through pre-treatment, coating and curing without being touched. This is the standard arrangement for powder coating and paint lines because the whole surface of a hanging part is exposed. Oven length is line speed multiplied by cure time, and the track can loop back and forth inside the chamber to fit a long cure into a short building. Typical working range is 120°C to 250°C. Air seals or vestibules at the entry and exit keep hot air in, and the hanger design sets the opening size.
