Drop-bottom Furnace
Furnace for aluminium solution treatment where the load drops straight into a quench tank.
Key Features
Quench in seconds through the furnace floor
Automatic door, hoist and tank sequence
High uniformity recirculating chamber
Movable quench tank or travelling furnace
Baskets designed to limit distortion
Specifications
Temperature: Up to 560°C
Heating: Electric, gas (LPG/PNG/CNG) or furnace oil, or dual fuel
Category: Low Temperature Furnaces
Industries: Aluminium heat treatment
A drop-bottom furnace stands above a quench tank. At the end of the soak, the floor of the furnace opens and the load is lowered straight into the water in a few seconds. It is the standard design for solution treating aluminium parts that must be quenched very quickly. The furnace works at 495°C to 540°C with close uniformity, and is built to 560°C. A hoist carries the basket, doors below slide aside, and the tank or the furnace moves on rails so different quenchants can be used. The whole sequence is automatic so that the quench delay stays the same from load to load.
